INSTALLATION

Below is a video and a few important points. You can click below to access the Installation Manual.

20200615_150106_edited.jpg

UNDERSTANDING THE SYSTEM

TOP HUNG SYSTEM

EACH PANEL HAS SET OF TOP ROLLERS

EACH PANEL HAS SET OF BOTTOM GUIDES

BOTTOM TRACK ACTS AS A GUIDE

IMPORTANT TO KNOW

CORRECT FIXINGS

Use the correct fixing when installing the Head Track

SUFFICIENT FIXINGS

Use a good number of fixing when installing the Tracks.

MAXIMUM FIXINGS

Concentrate fixing at the stacking area in the Head Track

COUNTERSUNK

Floor Track fixings must be countersunk Stainless steel

TOOLS REQUIRED

Drill 
Drill Bits
Screw Driver  Bits
4mm Hex Key

3mm Hex Key

Packers

Suitable Fixings

Level

Small No.2 Phillips Screw Driver

Small 4mm Flat Screw

Countersunk bits

6mm Spanner

LEVEL AND SQUARE

TOP TRACK

Installed first. Fixed to the top beam

BOTTOM TRACK

Installed level and square to top track

SIDE POSTS

Installed level and square to the top and bottom track

Picture1.jpg

IMPORTANT

DON'T FIT TO THE OPENING

The system is installed level and square. Fix the opening to suit the tracks if the opening is not square and level

THE SYSTEM MUST BE LEVEL AND SQUARE

The system will not operate if not installed correctly

Picture1.jpg

COMPLETE